Integrated exhaust condensing heat recovery unit Overview: condensing heat recovery fresh air system, exhaust cold, heat recycling, especially in winter, significantly improved heating performance, achieve environmental protection, and efficient energy-saving effect. Suitable for families, schools, hotels, food industry, large commercial establishments and public places. Winter indoor discharged about 20 ℃ hot air back to the outside through the evaporation side, and the low temperature of fresh outdoor air through the condensation side is heated to about 22 ℃ Nanjing Pu Ruitai new air system procurement, into the room. Summer indoor discharged cryogenic cold air is discharged to the outside through the condensation side, and the fresh outdoor air temperature dropped to around 18 ℃ by evaporation to the indoor side. During the transition season, no open compressor systems, only open the ventilation system Pu Ruitai new ventilation system, which is to ensure the introduction of fresh air, but also saves energy. Features: 1 completely eliminate cross-contamination of fresh air and exhaust completely separate, it is not the existence of cross-contamination of air. Clean and fresh. 2. High efficiency heat recovery ventilation in the cold because the heat exchanger through, not directly discharged through the exchanger in which the cold, the heat is recovered, can significantly improve equipment energy efficiency, is even more evident when the winter . 3. Low noise design uses special anti-vibration, the vibration transmission far, to achieve the purpose of noise reduction. Note that even if the installation does not track indoors. The network control using popular network control protocols, network run Nanjing Pu Ruitai new air system, remote monitoring, centralized management. Runner heat exchanger uses the most advanced third-generation heat recovery wheel production technology, the entire heat recovery wheel with aluminum foil wound whole production process, completely replaced the craft glue to paste wrapped around the body, wrapped production runner overall structure close, good ventilation, heat recovery efficiency up to 70% to 90%, the service life of 15 to 20 years. Runner unit works; combined heat recovery air handling units with separate air supply and exhaust systems, out of polluted indoor air, and injection of fresh outdoor air ventilation system Nanjing Pu Ruitai new offer, while the exhaust energy transfer to fresh air. Achieve energy recovery, to save energy. Case Features: 1, removable assembly frame structure, site assembly flexible. 2, insulation board to fill in the double steel high density polyurethane foam insulation composite panels, minimal energy loss 3, the frame is made of aluminum alloy profiles between the panel and the frame has a good sealing measures, the unit of the air leakage rate as low as 4, each unit is equipped with a functional segment opened outward and inward opening access doors negative positive pressure the access door to ensure positive, negative segment no cold bridges and air leakage. 5, after the end of galvanizing steel shafts, excellent strength and aesthetic appearance. Advantages: 1, to recover the sensible and latent heat. 2, recovery efficiency is relatively high. 3, can be used in high temperature exhaust system. 4, through speed control, suitable for different indoor and outdoor air parameters. Nanjing Pu Ruitai air system _ quote _ Keao Pu Ruitai air system environment provided by the Nanjing Environmental Engineering Equipment Co., Ltd. Keao. Keao Nanjing Environmental Engineering Equipment Co., Ltd. (www.njxfxt.com) strong, credible, Nanjing in other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead Keao environment and you work into the brilliant, for a better future!